Welding Precaution - MacDon R113 Operator's Manual

1.6 Welding Precaution

Welding should never be attempted on the R113 SP Disc Header while it is connected to a windrower.
WARNING
Severe damage to sensitive, expensive electronics can result from welding on the header while it is
connected to the windrower. It can be impossible to know what effect high current could have with regard
to future malfunctions or shorter lifespan. It is very important that welding on the header is not attempted
while the header is connected to the windrower.
If an Operator needs to do any welding on the R113 SP Disc Header, the header should first be disconnected and
removed from the windrower.
If it is unfeasible to disconnect the header from the windrower before attempting welding, refer to the windrower's
technical manual (available from your Dealer) for welding precautions detailing all electrical components that must
be disconnected first for safe welding.
214077
SAFETY
7
Revision A