6. Using the safecut spindle-nut wrench (B), torque
spindle nut (C) to 300 Nm (221 lbf·ft).
NOTE:
Position the safecut spindle-nut wrench (B)
90 degrees (D) to the torque wrench (A).
7. Return safecut spindle-nut wrench to left side
shield plate.
8. Inspect the threads of the two M10 bolts (A) and replace
if damaged.
9. Install two M10 bolts (A) and washers. Torque to 55 Nm
(40 lbf·ft).
10. Install retaining ring (A).
214077
MAINTENANCE AND SERVICING
Figure 4.107: Spindle Nut
Figure 4.108: Cutterbar Spindle
Figure 4.109: Cutterbar Spindle
154
D
A
A
C
B
A
Revision A