MacDon R113 Operator's Manual page 154

1. Position the drum disc assembly as shown.
2. Use a 305 mm (12 in.) extension and 16 mm deep
socket to install the four M12 bolts (A) and washers that
hold the drum disc in place. Torque to 85 Nm (63 lbf·ft).
3. Lubricate spindle splines (A). For specifications, refer to
the inside back cover of this manual.
NOTE:
For clarity, illustration shows cutaway view of drum and
tube shield.
4. Insert driveline (B) at an angle and guide it past hub
drive (C) and drum (D).
5. Insert splined spindle end (A) into splined bore of
driveline (B).
6. Place a bead of Loctite
four M12 hex flange head bolts (A) and spacers to
secure driveline assembly (B) to hub drive (C). Torque
bolts to 95 Nm (70 lbf·ft).
214077
MAINTENANCE AND SERVICING
®
242 around threads, and install
Figure 4.78: Drum Disc (Top View, Arrow
Indicates Front of Machine)
C
D
Figure 4.79: Vertical Driveline (Cutaway
View Shown)
A
Figure 4.80: Driveline Hardware
142
A
B
A
C
A
B
Revision A