10. Install top M10 hex flange head bolt (B) through cover
plate (A) and top plate (C).
11. Install lower M10 hex flange head bolt (D) through
cover plate (A) and vertical shield (E).
12. Tighten bolts (B) and (D).
13. Install vertical drive shield (B) using four M10 hex flange
head bolts (A).
WARNING
Ensure cutterbar is completely clear of foreign objects.
Foreign objects can be ejected with considerable force
when the machine is started and may result in serious
injury or machine damage.
214077
MAINTENANCE AND SERVICING
Figure 4.84: Cover Plate
Figure 4.85: Vertical Drive Shield
144
C
E
B
A
B
D
A
Revision A