Chapter 4: Maintenance And Servicing; Preparing Machine For Servicing - MacDon R113 Operator's Manual

4 Maintenance and Servicing
The following instructions provide information about routine header service. Detailed maintenance and service
information is contained in the technical manual that is available from your Dealer. A parts catalog is located in a
plastic case at the right end of the header.
Log hours of operation and use the maintenance record provided (refer to
page 101) to keep track of your scheduled maintenance.

4.1 Preparing Machine for Servicing

CAUTION
To avoid personal injury, perform the following procedures before servicing self-propelled disc header or
opening drive covers:
1. Lower the self-propelled disc header fully. If necessary to service in the raised position, always engage safety
props. Refer to 3.3 Engaging and Disengaging Header Safety Props, page 24
2. Disengage power take-off (PTO).
3. Stop engine and remove key.
4. Engage park brake.
5. Wait for all moving parts to stop.
214077
4.3.1 Maintenance Schedule/Record,
97
Revision A