Color Mode Checks - GE Versana Balance Basic Service Manual

General Procedures and Functional Checks

4-4-9 Color Mode Checks

4-4-9-1 Introduction
4-4-9-2 Preparations
4-4-9-3 Select Color 2D Mode
4-58 System view
Color Flow screens are 2D or M Mode screens with colors
representing blood or tissue movement.
Color Flow may be selected both from 2D mode or from M mode
or a combination of these.
• Connect one of the probes to the scanner's left-most probe
connector.
• Turn ON the scanner.
The 2D Mode window is displayed (default mode).
1. From an optimized 2D image, press CF.
2. Use the trackball to position the ROI frame over the area to
be examined.
3. Press Set. The instruction Size should be highlighted in the
trackball status bar. Use the trackball to adjust the
dimension of the ROI.
Versana Balance – Basic Service Manual
5808768-100 English Rev.9