Changing Application Analytics Engine Settings - Extreme Networks ExtremeAnalytics PV-A-305 Installation Manuals

3 Enter the IP Address of the eth0 interface and the Name of the Application Analytics engine.
4 Select the appropriate SNMP Profile from the Profile drop-down menu.
5 Click OK.
6 Select Enforce Engine from the drop-down menu.
The Application Analytics engine is added to Management Center.

Changing Application Analytics Engine Settings

Use these steps if you need to change your Application Analytics engine settings following your initial
engine configuration.
Changing Basic Network Configuration
To change basic network configuration settings such as hostname and engine IP address, enter the
following command at the engine CLI:
/usr/postinstall/dnetconfig
This starts the network configuration script and allows you to make the required changes. You must
reboot the engine for the new settings to take effect.
Changing SNMP Configuration
To change SNMP configuration settings such as SNMP Trap Community String, SNMP User, SNMP
Authentication, and SNMP Privacy credentials, enter the following command at the engine CLI:
/usr/postinstall/snmpconfig
This starts the SNMP configuration script and allows you to make the required changes.
ExtremeAnalytics® PV-A-305 Installation Guide for version 8.1
Configuration
23