Table of Contents
Advertisement
765-1205/0100-0000
10.3.1.2.1 Maintenance Information
The maintenance information includes information in text form that the user can set, e.g.,
the product name, installation location and date, contact information, description and date
of the last and next product service. The texts can be edited by selecting Settings from
the menu on the Maintenance information tab.
10.3.1.2.2 Advanced Module and Port Information
The advanced module and port information includes the following measurement data that
is measured by the integrated sensors in the module:
• The module temperature
• The supply voltage (for supply cables 1L and 2L)
• The sum of all currents (for supply cables 1L and 2L)
10.3.1.2.3 Displaying Licenses
The Licenses menu item displays the page of the same name.
The menu item contains the following information:
• A list of the licensed software components the product contains
• A link for each licensed software component to the associated license terms
10.3.1.3 Opening the Product Information via WAGO Webserver I/O Field
10.3.1.3.1 Display Port Information
For each of the digital inputs/outputs of the module (port X01, port X02, etc.), individual
port information can be found on the Information, Status, Configuration and Process
data tabs.
The Configuration tab also offers the option of making port settings.
You can access the port information as follows:
1. From the main menu of the Webserver (left), select the menu item which you want to
view information about.
ð The Information tab opens.
2. Click the desired tab.
ð You can now access information about the desired port.
The following four tabs are available for each digital input/output:
Tab
Information
Status
Configuration
Process data
Product manual | Version: 1.0.0
8DIO FLD EC DC 24V 2.0A
Table 39: Tab for port information (digital inputs/outputs X01, X02, etc.)
Description
Displays the current measured values for temperature, voltage and cur-
rent, as well as the port state, individually for pin 1, pin 2 and pin 4. If an
IO-Link device is connected to the digital input/output, its product data is
also shown. This tab is pre-configured.
Displays status information for the digital input/output.
For displaying and setting port parameters.
Displays the process data.
Commissioning
57
Advertisement
Chapters
Table of Contents
