Setting The Connection To Gx Works3 - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
10 PLC CPU Initial Setup

10.1.2 Setting the Connection to GX Works3

In order to setup GX Works3 and PLC CPU, it is necessary to open a project on GX Works3.
(1) Turn ON the PLC CPU.
Start GX Works3, and select [New] from the [Project] menu.
If a project is already created, open it. ([Project]-->[Open])
(2) When [New] is selected, the "New" dialogue box will appear.
Select "RCPU" for "Series" and a PLC CPU type to connect for "Type" and then click [OK].
(3) After selecting the "Connection Destination" in the Connection Destination window, double click "Connection" of
"Current Connection Destination".
135 IB-1501452-C