Machine Group-Based Alarm Stop; Outline - Mitsubishi Electric M800VW Series Programming Manual

Plc programming

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Programming Manual (2/2)

14 PLC Help Function

14.19 Machine Group-Based Alarm Stop

When an alarm occurs for an axis, this function performs an alarm stop only for the axes in a machine group to which the axis

belongs. When this function is used in a lathe system, even though an alarm occurs for the loader axis, the operation can be

continued if the servo axis and the spindle have been set in a different machine group from the loader axis as illustrated

below. Without this function, the alarm stop is performed for all the axes when an alarm occurs.

Likewise, when this function is used in a machining center system, the axes belonging to a different machine group from the

axis for which an alarm has occurred can continue the operation as illustrated below. Without this function, the alarm stop is

performed for all the axes when an alarm occurs.

The machining group number can be set for each servo axis and spindle in this function, and incorrect setting may lead to

accidents. Set the machine group number with enough care.

IB-1501668-B

Show Quick Links

Table of Contents