Cleaning And Care - Otto Bock Skippi Plus Instructions For Use Manual

6. Set the cover in place, hook it on, and press it down
tightly.
Fig. 56 Replacing the front direction indicator bulb
Replacing the LED headlight
The LED headlight (see fig. 55, item 2) is maintenance-free.
If repairs are required, the qualified personnel who fitted the
wheelchair can help.
Replacing the rear LED light (including rear direction
indicator)
The rear LED light (see fig. 50) is maintenance-free. If re-
pairs are required, the qualified personnel who fitted the
wheelchair can help.
Skippi Plus
9.6

Cleaning and care

NOTICE
Risk of damage to electronics due to water penetration.
In order to avoid malfunctions, the electronic components,
motors and batteries must not come into contact with wa-
ter when cleaning the power wheelchair.
NOTICE
Risk of damage to power wheelchair components. Do
not use any harsh cleaning agents, solvents or hard brush-
es to clean the power wheelchair. Never use a water jet or
high-pressure cleaning apparatus to clean the power
wheelchair.
INFORMATION
Prior to disinfection, clean the seat and back upholstery as
well as the seat cushion, control panel, and armrest.
The power wheelchair must be cleaned regularly, depend-
ing on the amount of use and the degree of soiling.
The control panel, battery charger, armrest and trim compo-
nents can be cleaned with a damp cloth and mild cleaning
solution.
Maintenance and care
Ottobock | 101