Cleaning And Care; Figure 50 Replacing The Direction Indicator Lamp; Figure 51 Rear Lamp, Pane Removed - Otto Bock B600 Instructions For Use Manual

Maintenance and Care
n To install the lamp, slide it in and rotate it into the lock.
n Insert the lamp socket into the housing and lock the
pane of the direction indicator in place
Figure 50 Replacing the direction indicator lamp
To change the rear direction indicators and the rear light,
proceed as follows (see Figure 51):
n Unscrew the pane.
n Press the lamp in slightly and give it a quarter turn
counter-clockwise, then pull it out.
n Insert new lamp and give it a quarter turn clockwise.
Page 170
Figure 51 Rear lamp, pane removed
9.5 Cleaning and Care
NOTICE
Risk of damage to electronics due to water penetra-
tion. In order to avoid malfunctions, the electronic compo-
nents, motor, and batteries must not come into contact
with water when cleaning the power wheelchair.
02/2010 B600