Fig. 26 Front Lights On The Side Panel; Fig. 27 Changing The Front Lights - Otto Bock B500 Instructions For Use Manual

Options
8.2 Lighting
An option for the power wheelchair is to have it equipped
with a set of lights.
The set of lights consists of:
r Two rear lamps with integrated direction indicators
r Two front lights consisting of halogen lamp and direc-
tion indicator (fig. 26).
fig. 26 front lights on the side panel
The front lights are mounted on the side panel. The rear
lights are attached to the wheelchair frame.
Button 9 on the control panel (see fig. 13) is used to
switch the lights on.
Symbol 16 on the LCD display (see fig. 14) indicates that
the lights are turned on.
Page 132
changing Defective Lights
nOTE !
Lamp housings or lamps can be ordered from
a specialist dealer.
To change the halogen lamp in the front light, proceed as
follows:
r Lightly push the black engaging lever at the lower end
of the lamp and fold the pane forward (see fig. 27,
item 1).
fig. 27 changing the front lights
1 Engaging lever of front light
2 Recess (use the screwdriver at this point)
03/2010 B500 | B500-S