Table of Contents
Advertisement
© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
PBV20N2
PBV20N2
5.8
5.8
Bogie bearing
Bogie bearing
Figure 33. Bogie bearing overview
Figure 33. Bogie bearing overview
There is no need to
There is no need to change the bogie bearing lubricant during the truck's lifetime.
change the bogie bearing lubricant during the truck's lifetime.
During maintenance, check the
During maintenance, check the following:
The bearing rotates easily when the traction wheel is raised up.
The bearing rotates easily when the traction wheel is raised up.
•
•
The drive unit's
The drive unit's mounting bolts are tightened properly.
mounting bolts are tightened properly.
•
•
5.9
5.9
Traction wheel
Traction wheel
Before installing the traction wheel, make sure that the wheel shaft, the face of
Before installing the traction wheel, make sure that
mounting, the wheel nuts and wheel bolts are
mounting, the wheel nuts and wheel bolts are clean, free from grease and undamaged.
NOTE: To access the traction wheel, lift the
NOTE: To access the traction wheel, lift the truck up (see the correct lifting points in
the section 5.1
the section
5.1 of this manual) and turn the transmission gear so that there is enough
of this manual) and turn the transmission gear so that there is enough
space for you to access and remove the wheel.
space for you to access and remove the wheel.
rights reserved.
rights
reserved.
Revision: B
Revision: B
https://www.forkliftpdfmanuals.com/
following:
CAUTION
CAUTION
the wheel shaft, the face of the rim
clean, free from grease and undamaged.
truck up (see the correct lifting points in
Document ID: 615023
Document ID: 615023
Service Manual
Service
Manual
the rim
52 (244)
52 (244)
Advertisement
Table of Contents
