Table of Contents
Advertisement
© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights
rights reserved.
reserved.
Revision: B
Revision: B
PBV20N2
PBV20N2
15.7.2
15.7.2
Battery
Battery lock
lock sensor
sensor functionality
1. 1. Connect
Connect the sup
the supply voltag
ply voltage betwee
2. 2. Measure
Measure the
the supply
supply voltage
voltage between
The value should be +24Vdc.
The value should be +24Vdc.
3. 3. Measure b
Measure between th
etween the blue
e blue (-) and blac
When a supply is connected and there are no metallic objects within the sensing
When a supply is connected and there are no metallic objects within the sensing
range, the value is approximately 0V.
range, the value is approximately 0V.
When a metallic object is moved within the sensing range, the value is the same as
When a metallic object is moved within the sensing range, the value is the same as
the supply voltage, i.e. +24Vdc.
the supply voltage, i.e.
4. 4. If the
If the values d
values do not
o not match th
match the above
15.8
15.8
Battery connector
Battery connector
This option is a replaceme
This option is a
replacement for a
NOTE: Make sure that you set
NOTE: Make sure that you set the mechanical voltage selector to the correct battery
voltage (24 V)! Also note the polarity of
voltage (24 V)! Also note the polarity of the battery cables.
15.9
15.9
Recharging plug
Recharging plug
This option is a replaceme
This option is a
replacement for a
NOTE: Make sure that you set
NOTE: Make sure that you set the mechanical voltage selector to the correct battery
voltage (24 V)! Also note the
voltage (24 V)! Also note the polarity of the battery cables.
https://www.forkliftpdfmanuals.com/
Document ID: 615023
Document ID: 615023
functionality check
check
e between the
n the brown (+)
brown (+) and blu
between the
the wires.
wires.
(-) and black (output) wire
k (output) wires on the
+24Vdc.
e above, replace
, replace the sen
the sensor.
nt for a defective battery connector.
defective battery connector.
the mechanical voltage selector to the correct battery
the battery cables.
nt for a defective recharging plug
defective recharging plug. .
the mechanical voltage selector to the correct battery
polarity of the battery cables.
199 (244)
199 (244)
Service Manual
Service
Manual
and blue (-) wires.
e (-) wires.
s on the voltage ar
voltage area.
ea.
sor.
Advertisement
Table of Contents
