Table of Contents
Advertisement
© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights
rights reserved.
reserved.
Revision: B
Revision: B
PBV20N2
PBV20N2
10.4
10.4
Hydraulic aggregate
Hydraulic aggregate
Figure 83. Hydraulic aggregate overview
Figure 83. Hydraulic aggregate overview
1. 1.
Hydraulic connector
Hydraulic connector
2. 2.
Oil tank
Oil tank
3. 3.
Solenoid valve
Solenoid valve
The hydraulic aggregate consists of the electric pump motor, the hydraulic gear pump
The hydraulic aggregate consists of the electric pump motor, the hydraulic gear pump
unit, the oil tank, the suction filter, the pressure relief valve,
unit, the oil tank,
the suction filter, the pressure relief valve, the solenoid valve, hydraulic
hoses and connections for various
hoses and connections for various hydraulic equipme
The hydraulic aggregate is used to control the load handling device.
The hydraulic aggregate is used to control the load handling device.
10.4.1
10.4.1
Disassembly of of the
Disassembly
Prepare a drip pan to
Prepare a drip pan to catch any remaining oil in the
catch any remaining oil in the pipes and hoses before
disconnecting each pipe. Take appropriate actions to prevent dust and dirt
disconnecting each pipe. Take appropriate actions to prevent dust and dirt from
entering in the opening of the pipe and valve connections.
entering in the opening of the pipe
https://www.forkliftpdfmanuals.com/
Document ID: 615023
Document ID: 615023
4. 4.
Hydraulic hose
Hydraulic hose
5. 5.
Pump motor
Pump motor
6. 6.
Filling hole for hydraulic oil
Filling hole for hydraulic oil
hydraulic equipment.
the hydraulic
hydraulic aggregate
aggregate
WARNING
WARNING
pipes and hoses before
and valve connections.
137 (244)
137 (244)
Service Manual
Service
Manual
the solenoid valve, hydraulic
nt.
from
Advertisement
Table of Contents
