Mitsubishi PBV20N2 Service Manual page 64

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All
PBV20N2 PBV20N2
5.14 5.14
Disassembly of the drive unit suspension Disassembly of the drive unit suspension
When you lift the truck up, make sure that you support it When you lift the truck up,
falling. falling.
NOTE: If the truck is equipped with the electrical steering option, you need to NOTE: If the truck is equipped with the electrical steering option, you need to
disassemble the electrical steering motor unit first before you can perform the steps disassemble the electrical steering motor unit first before you can perform the steps
provided below. For mo provided b elow. For more inform
motor unit, see section motor unit, see section 15.11.5. 15.11.5.
Figure 41. Drive unit suspension overview Figure 41. Drive unit suspension overview
1. 1. Motor bed Motor bed
2. 2. Motor bed frame Motor bed frame
3. 3. Motor connector Motor connector
4. 4. Power cable Power cable
5. 5. Cable mounting bracket Cable mounting bracket
https://www.forkliftpdfmanuals.com/
rights rights reserved. reserved. Revision: B Revision: B
WARNING WARNING
make sure that you support it properly to prevent it from
re information abou ation about the disassem t the disassembly of the electr
6. 6. Spring Spring
7. 7. Tub pin Tub pin
8. 8. Shaft Shaft
9. 9. Slide bearing Slide bearing
Document ID: 615023 Document ID: 615023
Service Manual Service Manual
properly to prevent it from
bly of the electrical steering ical steering
64 (244) 64 (244)