Mitsubishi PBV20N2 Service Manual page 65

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All
PBV20N2 PBV20N2
1. 1. Remove all the covers. For instructions, see section Remove all the covers. For instructions, see section 5.4.
2. 2. Remove the tiller arm and the tiller Remove the tiller arm and the tiller arm fastener. For instructions, see section
5.15. 5.15.
3. 3. Remove the drive unit. For instructions, see section Remove the drive unit. For instructions, see section 8.3.1.
4. 4. Remove the hydraulic cylinder. For Remove the hydraulic cylinder. For instructions, see section
5. 5. Remove the four screws at the Remove the four screws at the back
of the motor bed frame. of the motor bed frame.
6. 6. Lift the motor bed frame out of its Lift the motor bed frame out of its
slot. slot.
7. 7. Remove the screws and shafts Remove the screws and shafts
holding the drive unit suspension holding the drive unit suspension
springs in place. springs in place.
8. 8. Remove the springs. Remove the springs.
https://www.forkliftpdfmanuals.com/
rights reserved. rights reserved. Revision: B Revision: B
5.4.
arm fastener. For instructions, see section
8.3.1.
instructions, see section 10.5.
back
Document ID: 615023 Document ID: 615023
Service Manual Service Manual
10.5.
65 (244) 65 (244)