Mitsubishi PBV20N2 Service Manual page 119

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved. rights reserved. Revision: B Revision: B
PBV20N2 PBV20N2
TILLER, OPERATOR'S TILLER, OPERATOR'S
PLATFORM AND SIDE PLATFORM AND SIDE
GUARD POSITIONS GUARD POSITIONS
Sensor functionality check Sensor functionality check
1. 1. Connect Connect the sup the supply voltag ply voltage betwee
2. 2. Measure Measure the the supply supply voltage voltage between
The value should be +24 Vdc. The value should be +24 Vdc.
3. 3. Measure b Measure between th etween the blue (-) e blue (-) and black
When a supply is connected and there are no metallic objects within the sensing When a supply is connected and there are no metallic objects within the sensing
range, the value is approximately 0 V. range, the value is approximately 0 V.
When a metallic object is moved within the sensing range, the value is the same as When a metallic object is moved within the sensing range, the value is the same as
the supply voltage, i.e. +24 Vdc. the supply voltage, i.e. +24 Vdc.
If the values do not match the above, replace the sensor. If the values do not match the above, replace the sensor.
https://www.forkliftpdfmanuals.com/
Document ID: 615023 Document ID: 615023
SENSOR SENSOR
FUNCTIONALITY FUNCTIONALITY
S10:OFF S10:OFF
S11:OFF S11:OFF
S12:ON S12:ON
S13:ON S13:ON
S15:OFF S15:OFF
S16:OFF S16:OFF
S17:ON S17:ON
S10: OFF S10: OFF
S11: ON S11: ON
S12: ON S12: ON
S13: ON S13: ON
S15: OFF S15: OFF
S16: OFF S16: OFF
S17: ON S17: ON
e between the n the brown (+) brown (+) and blu
between the the wires. wires.
and black (output) wires (output) wires on the
118 (244) 118 (244)
Service Manual Service Manual
TRUCK FUNCTIONALITY TRUCK FUNCTIONALITY
When the operator's platform is When the operator's platform is
lowered and the side guards are out lowered and the side guards are out
but there is no operator present, the but there is no operator present, the
truck does not operate. truck does not operate.
Operator present, driving mode, Operator present, driving mode,
maximum speed limited to 9 km/h. maximum speed limited to 9 km/h.
and blue (-) wires. e (-) wires.
on the voltage ar voltage area. ea.