Table of Contents
Advertisement
© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
PBV20N2
PBV20N2
To avoid back injury, use a hoist when lifting components weighin
To avoid back injury, use a
•
•
more. Make sure all chains, hooks, slings, etc.,
more. Make sure all chains, hooks, slings, etc., are in good condition and of the
correct capacity. Make sure all hooks are positioned correctly. Lifting eyes are not
correct capacity. Make sure all hooks are
to be side-loaded during a lifting operation.
to be side-loaded during a lifting operation.
Make sure all protective devices including guards and shields are
Make sure all
protective devices including guards and shields are properly installed
•
•
and functioning correctly before starting a repair. If a guard or shield must be
and functioning correctly before starting a repair. If a
removed to perform the repair work, use
removed to perform the repair work, use extra caution.
Always suppo
Always support the mast and
rt the mast and carriage to keep
•
•
when performing maintenance or repair work that requires the mast to be in the
when performing maintenance or repair work that requires the mast to be in the
raised position.
raised position.
3.2
3.2
Personal safety
Personal safety
Remove all rings, watches and other pieces of metal jewellery before you start
Remove all rings, watches and other pieces of metal jewellery before you
•
•
working on the truck. If a metal object gets into contact with
working on the truck. If
conductive part, it may cause a short circuit or a serious burn.
conductive part, it may cause a short circuit or a serious burn.
Always wear protective glasses a
Always wear prote
ctive glasses and protective sh
•
•
In particular, wear protective glasses when using a hammer or sledge on any part of
In particular, wear protective glasses when using a hammer or
the truck or its attachments. Use welder's gloves, hood/goggl
the truck or
its attachments. Use welder's gloves, hood/goggles, apron and other
protective clothing appropriate to the welding job being performed. Do not wear
protective clothing appropriate to the welding job
loose fitting or torn clothing.
loose fitting or torn clothing.
3.3
3.3
Work safety
Work safety
Unauthorized truck modification is not
Unauthorize
d truck modification is not permitted. No modifications or alterations to a
•
•
powered industrial truck, which could affect, for example, capacity, stability or safety
powered industrial truck, which could affect, for example, capacity, stability or safety
requirements of the
requiremen
ts of the truck, shall be made without the
truck, shall be made without the prior written approval of the
original truck manufacturer, its authorized representative, or a successor thereof.
original truck manufacturer, its authorized representative, or a
This includes changes affecting, for example, braking, steering, visibility and the
This includes changes affecting, for example, braking, steering, visibility
addition of removable attachments. When the manufacturer or his successor
addition of removable attachments. When the manufacturer or his
approves a modification or alteration, the
approves a modification or alteration, the manufacture
make and approve appropriate changes to the capacity plate, decals, tags and
make and approve appropriate changes to the capacity plate, decals, tags and
operation and maintenance handbooks.
operation and maintenance handbooks.
Only in the event that the
Only in the event that the truck manufacturer is no longer in business and there is
no successor in the interest to the business, may the user arrange for a
no successor in the interest to
or alteration to a powered industrial truck, provided, however, that the user:
or alteration to a powered industrial truck, provided, however, that the
a. a.
arranges for
arranges
for the
the modification
implemente
implemented by an engineer(s) expert in industrial trucks
d by an engineer(s) expert in industrial trucks and their safety,
b. b.
maintains
maintains a a permanent
permanent record
modification or alteration,
modification or alteration,
c. c.
approves and
approves
and makes
makes appropriate
tags and instruction handbook, and
tags and instruction handbook, and
rights
rights reserved.
reserved.
Revision: B
Revision: B
https://www.forkliftpdfmanuals.com/
hoist when lifting components weighing 23 kg
are in good condition and of the
positioned correctly. Lifting eyes are not
extra caution.
carriage to keep the carriage o
the carriage or attachments ra
a metal object gets into contact with an electrically
nd protective shoes when wo
permitted. No modifications or alterations to a
manufacturer or
truck manufacturer is no longer in business and there is
the business, may the user arrange for a modificatio
modification or or alteration
alteration to to be
record of of the
the design,
design, test(s
appropriate changes
changes to to the
Document ID: 615023
Document ID: 615023
Service Manual
Service
Manual
g 23 kg (51 lb) or
(51 lb) or
properly installed
guard or shield must be
r attachments raised
start
an electrically
oes when working around
rking around trucks.
sledge on any part of
es, apron and other
being performed. Do not wear
prior written approval of the
successor thereof.
and the
successor
r or successor shall also
successor shall also
modification n
user:
be designed,
designed, tested
tested and
and
and their safety,
test(s) ) and
and implementation
implementation of of the
the capacity
capacity plate(s),
plate(s), decals,
decals,
ised
trucks.
the
13 (244)
13 (244)
Advertisement
Table of Contents
