Mitsubishi PBV20N2 Service Manual page 55

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All
PBV20N2 PBV20N2
3. 3. Wet the new wheel shaft bolt Wet the new wheel shaft bolt with
Loctite 243. Loctite 243.
4. 4. Install the new wheel shaft bolt. Install the new wheel shaft bolt.
5. 5. Tighten the new wheel shaft bolt. Tighten the new wheel shaft bolt.
The correct tightening torque is The correct tightening torque is
27 Nm. 27 Nm.
5.9.2 5.9.2 Assembly of of the Assembly the traction
1. 1. Align the rim' Align the rim's hole pattern s hole pattern with the
wheel shaft bolts and slide the wheel shaft bolts and slide the
traction wheel into place. traction wheel into place.
2. 2. Install the five rounded cone nuts Install the five rounded cone nuts
and tighten them. The correct and tighten them. The correct
tightening torque for the nuts is tightening torque for the nuts is
80 Nm. 80 Nm.
rights rights reserved. reserved. Revision: B Revision: B
https://www.forkliftpdfmanuals.com/
with
traction wheel wheel
with the
Document ID: 615023 Document ID: 615023
Service Manual Service Manual
55 (244) 55 (244)