© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights reserved.
rights
reserved.
Revision: B
Revision: B
PBV20N2
PBV20N2
8.4.1
8.4.1
Solenoid
Solenoid valve
valve
Figure 66. Solenoid valve overview
Figure 66. Solenoid valve overview
Solenoid valve is an electrically controlled hydraulic valve that has two main
Solenoid valve is an electrically controlled hydraulic valve that has two main parts: a
solenoid (coil) and a valve. The solenoid converts electrical energy into
solenoid (coil) and a
valve. The solenoid converts electrical energy into mechanical
energy which, in turn, opens or
energy which, in turn, opens or closes the valve mechanically. This basic ON/OFF
function is used to control the oil flow to the cylinders.
function is used to control the oil flow to the cylinders.
Type
Type
Contact rating
Contact rating
Electrical wiring
Electrical wiring
The basic solenoid test is to measure the ohms between the solenoid terminals XY1/A1
The basic solenoid test is to measure the ohms between the solenoid terminals XY1/A1
and XY1/A2. The value should be ~27
and XY1/A2. The value should be ~27 Ω.
https://www.forkliftpdfmanuals.com/
Document ID: 615023
Document ID: 615023
closes the valve mechanically. This basic ON/OFF
Solenoid
Solenoid
24 Vdc / 22 W
24 Vdc / 22 W
Quick connect terminals 6.3 x 0.8 mm
Quick connect terminals 6.3 x 0.8 mm
Ω.
115 (244)
115 (244)
Service Manual
Service
Manual
parts: a
mechanical