© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights
rights reserved.
reserved.
Revision: B
Revision: B
PBV20N2
PBV20N2
At the traction mo
At the traction motor end, the ca
tor end, the cable and wiring
insulation damage, see
insulation damage, see Figure 73.
Figure 73. If If you have to disassemble the factory-installed cable
set, remember to reassemble the cables and wires with the
set, remember to reassemble the cables and wires with the correct lengths, in the
correct order and making sure they are
correct order and making sure they are not twisted.
Figure 73. Correct cable and wiring lengths
Figure 73. Correct cable and wiring lengths
https://www.forkliftpdfmanuals.com/
Document ID: 615023
Document ID: 615023
ble and wiring lengths mu
lengths must be correct to pre
you have to disassemble the factory-installed cable
not twisted.
124 (244)
124 (244)
Service Manual
Service
Manual
st be correct to prevent
vent
correct lengths, in the