Mitsubishi PBV20N2 Service Manual page 45

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All
PBV20N2 PBV20N2
After removing the rubber absorbers, beware of sharp edges when removing the After removing the rubber absorbers, beware of sharp edges when
operator's platform. operator's platform.
When installing the rubber absorbers, remember to use locking glue (for example, When installing the rubber absorbers, remember to use locking glue
Loctite 243). Loctite 243).
After the rubbe After the rubber absorbers have r absorbers have been remo
platform: platform:
1. 1. Remove the two screws under the Remove the two screws under the
operator's platform. operator's platform.
2. 2. Remove the operator's platform. Remove the operator's platform.
When removing the operator's platform, note that it weights 35 When removing the operator's platform, note that it weights 35 kg.
NOTE: When installing the operator' NOTE: When installing the operator's platform, place a support, such as
similar, between the operator's platform and the mounting bracket to prevent the similar, between the operator's platform and the mounting bracket to prevent the
operator's platform from lifting too much. See Figure 29 operator's platform from lifting too much. See
rights reserved. rights reserved. Revision: B Revision: B
https://www.forkliftpdfmanuals.com/
CAUTION CAUTION
been removed, you can ved, you can remove the o
CAUTION CAUTION
s platform, place a support, such as a block or
Figure 29 below.
Document ID: 615023 Document ID: 615023
Service Manual Service Manual
removing the
(for example,
remove the operator's perator's
kg.
a block or
below.
45 (244) 45 (244)