Table of Contents
Advertisement
© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
PBV20N2
PBV20N2
4.3.4.2 Riding
4.3.4.2
Riding mode
mode
Figure 9. Operator's platform and side guards in the riding mode
Figure 9. Operator's platform and side guards in the riding
To drive the truck in the riding mode, lower the operator's platform to the
To drive the truck
in the riding mode, lower the operator's platform to the horizontal
position and unfold the side guards. The side guards keep the operator within the
position and unfold the side guards. The side guards keep the operator within the
outlines of the truck and prevent the operator from losing balance.
outlines of the truck and
prevent the operator from losing balance.
To drive the truck in the riding mode, step on the platform and keep both hands on the
To drive the truck in the riding mode, step on the platform and keep both hands on the
tiller arm. When you step off the platform, it stays
tiller arm. When you step
automatically.
automatically.
NOTE: The maximum driving speed in the riding mode is 9 km/h.
NOTE: The maximum driving speed in the riding mode is 9 k
It is also possible to drive the truck
It is
also possible to drive the truck on the platform without unfolding the side guards.
In this case,
In this case, the maximum driving speed has been limited to 6 km/h.
the maximum driving speed has been limited to 6 km/h.
There is also an optional 12 km/h speed mode available, where the top speed is
There is also an optional 12 km/h speed mode available, where the top speed is
adjusted according to the load.
adjusted according to the load.
rights reserved.
rights
reserved.
Revision: B
Revision: B
https://www.forkliftpdfmanuals.com/
off the platform, it stays in the horizontal position
in the horizontal position
on the platform without unfolding the side guards.
Document ID: 615023
Document ID: 615023
Service Manual
Service
Manual
mode
horizontal
m/h.
24 (244)
24 (244)
Advertisement
Table of Contents
