Mitsubishi PBV20N2 Service Manual page 213

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights rights reserved. reserved. Revision: B Revision: B
PBV20N2 PBV20N2
15.11.5 15.11.5 Disassembly o Disassembly of the electrical stee
1. 1. Remove the motor belt. For instructions, see section Remove the motor belt. For instructions, see section 15.11.7.
2. 2. Remove the screws of the sensor Remove the screws of the sensor
mounting bracket. mounting bracket.
3. 3. Remove the sensor mounting Remove the sensor mounting
bracket. bracket.
4. 4. Loosen the belt roller's Loosen the belt roller's tightening
screw. screw.
5. 5. Remove the belt roller. Remove the belt roller.
6. 6. Loosen the belt roller flange's Loosen the belt roller flange's
tightening screws. tightening screws.
7. 7. Remove the belt roller Remove the belt roller flange.
https://www.forkliftpdfmanuals.com/
Document ID: 615023 Document ID: 615023
f the electrical steering motor unit ring motor unit
tightening
flange.
212 (244) 212 (244)
Service Manual Service Manual
15.11.7.