Mitsubishi PBV20N2 Service Manual page 63

Table of Contents

Advertisement

   
   
© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
PBV20N2
PBV20N2
Disassembly of the castor wheel unit:
Disassembly of the castor wheel unit:
1. 1. Remove the bolts and the nuts
Remove the bolts and the nuts
attaching the castor wheel unit to the
attaching the castor wheel unit to the
castor wheel suspension
castor wheel suspension
mechanism.
mechanism.
2. 2. Remove the castor wheel unit.
Remove the castor wheel unit.
 Assembly of the
 Assembly of the castor wheel un
castor wheel unit: it:
1. 1. Install the castor wheel unit.
Install the castor wheel unit.
2. 2. Tighten the bolts and the nuts attaching the castor wheel unit
Tighten the bolts and the nuts attaching the castor wheel unit to the castor wheel
suspension mechanism.
suspension mechanism.
3. 3. Check that there is not
Check that there is not too much play in the
4. 4. Check that the castor wheel rotates properly.
Check that the castor wheel rotates properly.
Disassembly of the rubber
Disassembly of the rubber spring:
1. 1. Remove the bolt and the nut holding
Remove the bolt and the nut holding
the rubber spring in place.
the rubber spring in place.
2. 2. Remove the rubber spring and the
Remove the rubber spring and the
washers by pulling them to the side.
washers by pulling them to the side.
 Assembly of the
 Assembly of the rubber spring
rubber spring: :
1. 1. Install the rubber spring and the washers.
Install the rubber spring and the washers.
2. 2. Tighten the bolt and the nut keeping the rubber spring in place. Do not over
Tighten the bolt and the nut keeping the rubber spring in place. Do not over
tighten! Always use a new locking nut and tighten the nut only so much
tighten! Always use a new locking nut and
locking part of the nut is on the threads.
locking part of the nut is on the threads.
https://www.forkliftpdfmanuals.com/
rights reserved.
rights
reserved. 
 
Revision: B 
Revision: B
too much play in the bearing of the castor wheel unit.
bearing of the castor wheel unit.
spring:
tighten the nut only so much that the
 
Document ID: 615023
Document ID: 615023
Service Manual
Service
Manual
to the castor wheel
that the
63 (244) 
63 (244)
 

Advertisement

Table of Contents
loading

Table of Contents