Mitsubishi PBV20N2 Service Manual page 211

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved. rights reserved. Revision: B Revision: B
PBV20N2 PBV20N2
15.11.3.2 15.11.3.2 Fuses Fuses with with electrical
Figure 105. Fuses with electrical steering Figure 105. Fuses with electrical steering
1. 1. Line connector fuse Line connector fuse
2. 2. Electric steering fuse Electric steering fuse
3. 3.
Control circuit fuse Control circuit fuse
15.11.4 15.11.4 Feedback Feedback sensor sensor
The feedback sensor is used for monitoring the steering wheel position. With this The feedback sensor is used for monitoring the steering wheel position. With this
sensor, the steering controller can adjust the steering angle of the sensor, the steering controller can adjust the steering angle of the truck. The feedback
angle sensor has an output signal from 0.5–4.5 Vdc. angle sensor has an output signal from 0.5–4.5 Vdc.
Type Type
V V
s s
Output signal Output signal
Electrical wiring Electrical wiring
Spare part Spare part
https://www.forkliftpdfmanuals.com/
Document ID: 615023 Document ID: 615023
electrical steering steering
4. 4. Optional Optional
5. 5. Drive/pump motor fuse Drive/pump motor fuse
6. 6.
Working lights fuse (optional) Working lights fuse (optional)
Pressure transmitter
Pressure transmitter
+5 Vdc +5 Vdc
0.5 – 4.5 Vdc / < 15 mA 0.5 – 4.5 Vdc / < 15 mA
(2 signals, crossed signal curves) (2 signals, crossed signal curves)
1 = L+ (Supply) 1 = L+ (Supply)
2 = OUT (output signal 1) 2 = OUT (output signal 1)
3 = M (GND) 3 = M (GND)
4 = OUT2 (output signal 2) 4 = OUT2 (output signal 2)
RL601333 RL601333
210 (244) 210 (244)
Service Manual Service Manual
truck. The feedback