Table of Contents
Advertisement
© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
9
9
Electric
Electric
rights reserved.
rights
reserved.
Revision: B
Revision: B
PBV20N2
PBV20N2
system
system
adjustments
adjustments
The basis for calibrations is that all of the
The basis for calibrations is that
truck parameter list and settings. Before you start
truck parameter list and settings. Before you start adjusting the calibration parame
make sure that the rest of the parameters are in order.
make sure that the rest of the parameters are in order.
9.1
9.1
Calibrating the accelerator
Calibrating the accelerator
If the accelerator or the Zapi COMBIACX Power controller is changed, the accelerator
If the accelerator or
the Zapi COMBIACX Power controller is changed, the accelerator
must be calibrated. Also if the
must be calibrated. Also if the truck does not drive smoothly, it
always first perform this
always first perform this calibration.
9.1.1
9.1.1
Acquiring
Acquiring the
the VACC
1. 1. Connect TruckTool to the truck.
Connect TruckTool to the truck.
2. 2. In TruckTool, go to the Wizards
In TruckTool, go to the Wizards view.
3. 3. Select the "Accelerator calibration" option and click the "Start wizard" button next
Select the "Accelerator calibration" option and click the "Start wizard" button next
to it.
to it.
4. 4. Make sure that the truck's
Make sure that the truck's
accelerator lever is in the middle
accelerator lever is in the middle
position.
position.
5. 5. In TruckTool, click "Start" in
In TruckTool, click "Start" in the Wizard popup window.
6. 6. Pull the truck's tiller to the driving
Pull the truck's tiller to the driving
position and turn the
position and turn the accelerator
lever to one end position and then to
lever to one end position and then to
the other end position.
the other end position.
https://www.forkliftpdfmanuals.com/
Document ID: 615023
Document ID: 615023
and
and
measurements
measurements
all of the parameters are correctly set according to the
parameters are correctly set according to the
truck does not drive smoothly, it is recommended that you
calibration.
VACC with
with TruckTool
TruckTool
view.
the Wizard popup window.
accelerator
Service Manual
Service
Manual
adjusting the calibration parameters,
is recommended that you
127 (244)
127 (244)
ters,
Advertisement
Table of Contents
