Mitsubishi PBV20N2 Service Manual page 85

8 8 Electric Electric
© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All
PBV20N2 PBV20N2
system system maintenance maintenance
8.1 8.1
Tiller arm Tiller arm
Figure 49. Tiller arm overview Figure 49. Tiller arm overview
1. 1. Tiller head Tiller head
2. 2.
Tiller head switches Tiller head switches
8.1.1 8.1.1 Removing Removing the the tiller
Before opening the tiller head, turn the key switch to the OFF position and Before opening the tiller head, turn the
the battery plug/connector. Record the places of the harness connections before the battery plug/connector. Record the places of the harness connections before
disassembly. disassembly.
When disconnecting the connector, hold the connector housing and plug and then When disconnecting the connector, hold the connector housing and plug and then
unlock the connector. Holding the case may cause unlock the connector. Holding the case may cause damage to the inside card, while
holding the cable may cause wire holding the cable may cause wire breakage.
https://www.forkliftpdfmanuals.com/
rights rights reserved. reserved. Revision: B Revision: B
3. 3. Safety button Safety button
4. 4. Accelerator
Accelerator
tiller head head
CAUTION CAUTION
key switch to the OFF position and disconnect
damage to the inside card, while
breakage.
Document ID: 615023 Document ID: 615023
Service Manual Service Manual
disconnect
85 (244) 85 (244)