© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
PBV20N2
PBV20N2
NOTE: To access the castor wheels, lift
NOTE: To access the castor wheels, lift the truck up (see the
the section 5.1
the section
5.1 of this manual).
of this manual).
5.12.1
5.12.1
Disassembly
Disassembly of of the
1. 1. Open the nut holding the castor
Open the nut holding the castor
wheel bolt in the bracket.
wheel bolt in the bracket.
2. 2. Remove the bolt holding the castor
Remove the bolt holding the castor
wheel in the bracket.
wheel in the bracket.
3. 3. Remove the castor wheel from the
Remove the castor wheel from the
bracket.
bracket.
4. 4. Remove the sleeves from the
Remove the sleeves from the
bearing and save them.
bearing and save them.
5.12.2
5.12.2
Adjusting
Adjusting the
the castor
The castor wheels need to be adjusted according to the wear of the traction wheel:
The castor wheels need to be adjusted according to the
In a new truck, the castor wheels are in location 1 shown in
In a new truck, the castor wheels are in location 1 shown in Figure 39.
•
•
When the traction wheel's diameter reaches 220 mm, move the castor wheels to
When the traction wheel's diameter reaches 220 mm, move the castor wheels to
•
•
location 2.
location 2.
When the traction wheel's diameter reaches 214 mm, replace the traction
When the traction wheel's diameter reaches 214
•
•
and move the castor wheels back to
and move the castor wheels back to location 1.
rights
rights reserved.
reserved.
Revision: B
Revision: B
https://www.forkliftpdfmanuals.com/
the truck up (see the correct lifting points in
the castor
castor wheel
wheel
castor wheels
wheels
location 1.
Document ID: 615023
Document ID: 615023
Service Manual
Service
Manual
correct lifting points in
wear of the traction wheel:
Figure 39.
mm, replace the traction wheel
wheel
60 (244)
60 (244)