Table of Contents
Advertisement
© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights
rights reserved.
reserved.
Revision: B
Revision: B
PBV20N2
PBV20N2
4. 4. Check the motor belt's tightness by
Check the motor belt's tightness by
pressing it to see how much it gives
pressing it to see how much it gives
in. When correctly adjusted, the belt
in. When correctly adjusted, the belt
should give in approximately
should give in approximately
1.8 mm.
1.8 mm.
5. 5. Tighten the nut of the tightening screw.
Tighten the nut of the tightening screw.
6. 6. Tighten the motor belt
Tighten the motor belt fastener.
15.11.7
15.11.7 Replacing t
Replacing the motor
he motor belt
1. 1. Loosen the motor belt fastener.
Loosen the motor belt fastener.
2. 2. Loosen the motor belt's tightening
Loosen the motor belt's tightening
screw.
screw.
3. 3. Remove the motor belt.
Remove the motor belt.
4. 4. Install the new motor belt.
Install the new motor belt.
5. 5. Adjust the mo
Adjust the motor belt as instructe
tor belt as instructed in section
15.11.8 Adjusting the elec
15.11.8
Adjusting the electrically powere
If any of
If any of the electric steering components are changed, the electrically powered steering
the electric steering components are changed, the electrically powered steering
must be adjusted.
must be adjusted.
15.11.8.1 Adjusting
15.11.8.1
Adjusting the
the tiller
https://www.forkliftpdfmanuals.com/
Document ID: 615023
Document ID: 615023
fastener.
belt
d in section 15.11.6
15.11.6 above.
trically powered steering
d steering
tiller and
and feedback
feedback sensors
sensors
216 (244)
216 (244)
Service Manual
Service
Manual
above.
Advertisement
Table of Contents
