Mitsubishi PBV20N2 Service Manual page 97

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights rights reserved. reserved. Revision: B Revision: B
PBV20N2 PBV20N2
Figure 56. Zapi COMBIACX Power connectors Figure 56. Zapi COMBIACX Power connectors
1. 1. CND external connector CND external connector
2. 2. CNC external connector CNC external connector
The Zapi COMBIACX Power inverter uses four connectors: The Zapi COMBIACX Power inverter uses four connectors:
CNA 14 poles CNA 14 poles connector, spare part: RL450937 connector, spare part: RL450937
• •
CNB 8 poles connector, spare part: RL450935 CNB 8 poles connector, spare part: RL450935
• •
CNC 10 poles connector, spare part: RL450936 CNC 10 poles connector, spare part: RL450936
• •
CND 6 poles connector, spare part: RL450661 CND 6 poles connector, spare part: RL450661
• •
Contact 0.2 – 0.8 mm2 for CNA, CNB, CNC and CND connectors, Spare part: Contact 0.2 – 0.8 mm2 for CNA, CNB, CNC and CND connectors, Spare part:
RL450666 RL450666
8.2.3.1 8.2.3.1 CNA CNA external external connector
CONNECTION CONNECTION
A1 EV1 (XA1 A/1) A1 EV1 (XA1 A/1)
(fan control) (fan control)
A4 DI5 (XA1 A/4) A4 DI5 (XA1 A/4)
(platform up S10) (platform up S10)
https://www.forkliftpdfmanuals.com/
Document ID: 615023 Document ID: 615023
3. 3. CNB external connector CNB external connector
4. 4. CNA external connector CNA external connector
connector
DESCRIPTION DESCRIPTION
Output of the protected ON/OFF electrovalve driver; Output of the
1.5 A maximum continuous current (driving to – 1.5 A maximum continuous current (driving to –
Batt). Built-in freewheeling diode to B2. This output Batt). Built-in freewheeling diode to B2. This output
is activated when the 1ST function (input A12) is is activated when the 1ST function (input
requested. requested.
Input of the switch DI5. The Input of the switch DI5. The input is activated when
it is connected to +Batt. The default function is the it is connected to +Batt. The default function is the
controller HORN input. When the switch is closed, controller HORN input. When the switch is closed,
the horn output is activated. the horn output is activated.
Service Manual Service Manual
protected ON/OFF electrovalve driver;
A12) is
input is activated when
96 (244) 96 (244)