Mitsubishi PBV20N2 Service Manual page 68

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All
PBV20N2 PBV20N2
3. 3. Remove the brake wires from the Remove the brake wires from the
connector using the extraction tool connector using the extraction tool
(360058). (360058).
4. 4. Remove the bolts attaching the tiller Remove the bolts attaching the tiller
arm fastener to the magnetic brake. arm fastener to the magnetic brake.
5. 5. Remove the tiller arm fastener and Remove the tiller arm fastener and
the tiller arm. the tiller arm.
During the installation of the tiller arm, tighten the bolts of the tiller arm fastener first by During the installation of the tiller arm, tighten the bolts of the tiller arm fastener first by
hand to make sure they fit the threads correctly. After that, cross-tighten the bolts with a hand to make sure they fit the threads correctly. After that, cross-tighten the bolts with a
power tool, making sure that the fastener is power tool, making sure that the fastener is aligned correctly.
https://www.forkliftpdfmanuals.com/
rights reserved. rights reserved. Revision: B Revision: B
aligned correctly.
Document ID: 615023 Document ID: 615023
Service Manual Service Manual
68 (244) 68 (244)