Mitsubishi PBV20N2 Service Manual page 144

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All
11 11 TruckTool TruckTool
rights reserved. rights reserved. Revision: B Revision: B
PBV20N2 PBV20N2
Diagnostics Diagnostics
Software maintenance can be performed with a diagnostics applicatio Software maintenance can be performed with a
TruckTool. This program runs on a laptop PC and TruckTool. This program runs on a laptop PC and connects to the truck's data bus
(CAN) via a (CAN) via a special adapter and wire harness. special adapter and wire harness.
TruckTool can be used to receive, display and modify settings, update (flash) controller TruckTool can be used to receive, display and modify settings, update (flash) controller
firmware, reset settings to hardware defaults, review and clear firmware, reset settings to hardware defaults, review and clear alarms, perform
calibrations, execute a quick truck setup and monitor digital and analogue inputs and calibrations, execute a quick truck
outputs. outputs.
The TruckTool program's usage instructions are available in the application itself. The TruckTool program's usage instructions are available in
Additional trai Additional training is require ning is required to use the p
Figure 85. TruckTool Diagnostics Figure 85. TruckTool Diagnostics
https://www.forkliftpdfmanuals.com/
Document ID: 615023 Document ID: 615023
diagnostics application called
connects to the truck's data bus
setup and monitor digital and analogue inputs and
d to use the program. rogram.
143 (244) 143 (244)
Service Manual Service Manual
n called
alarms, perform
the application itself.