Mitsubishi PBV20N2 Service Manual page 91

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All
PBV20N2 PBV20N2
8.1.4 8.1.4 Removing Removing the the accelerator
NOTE: Record the places of the wire connections before disassembly. NOTE: Record the places of the wire connections before disassembly.
Keep the accelerator connector because the new accelerator is delivered without a Keep the accelerator connector because the new accelerator is delivered without a
connector. connector.
Figure 53. Accelerator overview Figure 53. Accelerator overview
1. 1. Rubber handle Rubber handle
2. 2. Accelerator knob Accelerator knob
3. 3.
Safety button Safety button
4. 4. Microswitch bracket Microswitch bracket
1. 1. Remove the tiller head. For instructions, see section Remove the tiller head. For instructions, see section 8.1.1
2. 2. Remove the safety button. For instructions, see section Remove the safety button. For instructions, see section 8.1.3
https://www.forkliftpdfmanuals.com/
rights reserved. rights reserved. Revision: B Revision: B
accelerator
5. 5. Accelerator connector Accelerator connector
6. 6. Mounting bracket Mounting bracket
7. 7. Accelerator
Accelerator
Document ID: 615023 Document ID: 615023
Service Manual Service Manual
8.1.1 above. above.
8.1.3 above. above.
91 (244) 91 (244)