© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
PBV20N2
PBV20N2
5.6.1
5.6.1
Replacing
Replacing the
the operator's
The gas spring of the operator's platform can be replaced either with the platform in
The gas spring of the
operator's platform can be replaced either with the platform in
place or with the platform removed comple
place or with the
platform removed completely from the truck
replacing the operator's platform gas spring are provided below, but the same
replacing the operator's platform gas spring are provided below, but the same
instructions can be applied also while working with the platform removed.
instructions can be applied also while working with the platform removed.
1. 1. Remove the rubber mat from the
Remove the rubber mat from the
operator's platform by pulling it from
operator's platform by pulling it from
one corner.
one corner.
2. 2. Lift the operator's platform up.
Lift the operator's platform up.
3. 3. Open the locking spring using a
Open the locking spring using a
screwdriver. Also remove the ball
screwdriver. Also remove the ball
joint if need
joint if needed.
ed.
rights reserved.
rights
reserved.
Revision: B
Revision: B
https://www.forkliftpdfmanuals.com/
operator's platform
platform gas
gas spring
tely from the truck frame. Instructions for
Document ID: 615023
Document ID: 615023
Service Manual
Service
Manual
spring
frame. Instructions for
48 (244)
48 (244)