© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
rights reserved.
rights
reserved.
Revision: B
Revision: B
PBV20N2
PBV20N2
Figure 63. HALL sensor
Figure 63. HALL sensor
8.3.6.1 Replacing
8.3.6.1
Replacing the
the HALL
1. 1. Remove the socket screw.
Remove the socket screw.
2. 2. Disconnect the sensor
Disconnect the sensor connector.
3. 3. Disassemble the wires from the
Disassemble the wires from the
sensor connector. Note the pin
sensor connector. Note the pin
location of each wire.
location of each wire.
4. 4. Remove the HALL sensor.
Remove the HALL sensor.
5. 5. Install the new HALL sensor.
Install the new HALL sensor.
6. 6. Connect the wires to the sensor
Connect the wires to the sensor connector.
7. 7. Connect the sensor
Connect the sensor connector.
https://www.forkliftpdfmanuals.com/
Document ID: 615023
Document ID: 615023
HALL sensor
sensor
connector.
connector.
connector.
112 (244)
112 (244)
Service Manual
Service
Manual