Mitsubishi PBV20N2 Service Manual page 210

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All
A13 GND (XA2 A/13) A13 GND (XA2 A/13)
(temperature sensor negative) (temperature sensor negative)
rights reserved. rights reserved. Revision: B Revision: B
PBV20N2 PBV20N2
CONNECTION CONNECTION
A14 CANH (XA2 A/1 A14 CANH (XA2 A/14) 4)
(CANH) (CANH)
15.11.3.2 CNB 15.11.3.2 CNB external external connector
CONNECTION CONNECTION
B1 NPOT (XA2 B/1) B1 NPOT (XA2 B/1)
(GND) (GND)
B2 PPOT (XA2 B/2) B2 PPOT (XA2 B/2)
(supply) (supply)
B3 THMOT (XA2 B/3) B3 THMOT (XA2 B/3)
(temperature sensor positive) (temperature sensor positive)
B4 +5VDC (XA2 B/4) B4 +5VDC (XA2 B/4)
(+5V) (+5V)
B6 CPOT (XA2 B/6) B6 CPOT (XA2 B/6)
(CPOC1) (CPOC1)
B7 CHB (XA2 B/8) B7 CHB (XA2 B/8)
(B) (B)
B8 CHA (XA2 B/8) B8 CHA (XA2 B/8)
(A) (A)
15.11.3.1 15.11.3.1 Description of of the Description
CONNECTION CONNECTION
- B - B
+ B + B
- P - P
U; V; W U; V; W
The correct tightening torque for the Zapi EPS AC0 terminal bolts is 2.5 – 3 Nm. The correct tightening torque for the Zapi EPS AC0 terminal bolts is 2.5 – 3 Nm.
https://www.forkliftpdfmanuals.com/
GND. Motor temperature sensor negative. GND. Motor temperature sensor negative.
Document ID: 615023 Document ID: 615023
DESCRIPTION DESCRIPTION
CAN bus high. CAN bus high.
connector
DESCRIPTION DESCRIPTION
FB POT negative supply. FB POT negative supply.
FB PIT positive supply. FB PIT positive supply.
Motor temperature sensor (KTY84-130) input. Motor temperature sensor (KTY84-130) input.
Encoder positive supply. Encoder positive supply.
FB POT wiper. FB POT wiper.
Encoder channel B. Encoder channel B.
Encoder channel A. Encoder channel A.
the power power connections connections
DESCRIPTION DESCRIPTION
Negative of the battery. Negative of the battery.
Positive of the battery. Positive of the battery.
Negative of the pump motor. Negative of the pump motor.
Connection bars of the three motor phases. Connection bars of the three motor phases.
209 (244) 209 (244)
Service Manual Service Manual