Mitsubishi PBV20N2 Service Manual page 86

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All
PBV20N2 PBV20N2
Figure 50. Tiller head overview Figure 50. Tiller head overview
1. 1. Tiller head Tiller head
2. 2. Connector Connector
1. 1. Remove the logo plate. Remove the logo plate.
2. 2. Remove the tiller head fixing screw. Remove the tiller head fixing screw.
3. 3. Lift the tiller head carefully upwards Lift the tiller head carefully upwards
until you can feel the connector until you can feel the connector
wires tightening. Be careful not to wires tightening. Be careful not to
damage the wiring. When pulling the damage the wiring. When pulling the
tiller head up, note that the pipe tiller head up, note that the pipe
edges are sharp and may cut you. edges are sharp and may cut you.
https://www.forkliftpdfmanuals.com/
rights reserved. rights reserved. Revision: B Revision: B
3. 3. Tiller head fixing screw Tiller head fixing screw
4. 4. Logo plate Logo plate
Document ID: 615023 Document ID: 615023
Service Manual Service Manual
86 (244) 86 (244)