© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
PBV20N2
PBV20N2
4. 4. Carefully lower the operator's
Carefully lower the operator's
platform.
platform.
5. 5. Pull the gas spring out through the
Pull the gas spring out through the
hole in the operator's platform.
hole in the
operator's platform.
6. 6. Push the new spring into place,
Push the new spring into place,
making sure that the spring's head is
making sure that the spring's head is
positioned correctly into the slot
positioned correctly into the slot
inside the operator's platform.
inside the operator's platform.
7. 7. Carefully lift the operator's platform, making sure that the new
Carefully lift the operator's platform, making sure that the new spring does not fall
out.
out.
8. 8. Tighten the gas spring locking spring and install the ball joint if
Tighten the gas spring locking spring and install the ball joint if it was r
earlier.
earlier.
9. 9. Lower the operator's platform.
Lower the operator's platform.
10.
10. Attach the rub
Attach the rubber mat to the o
ber mat to the operator's plat
rights reserved.
rights
reserved.
Revision: B
Revision: B
https://www.forkliftpdfmanuals.com/
perator's platform.
form.
Document ID: 615023
Document ID: 615023
Service Manual
Service
Manual
spring does not fall
it was removed
emoved
49 (244)
49 (244)