Mitsubishi PBV20N2 Service Manual page 108

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights rights reserved. reserved. Revision: B Revision: B
PBV20N2 PBV20N2
3. 3. Disconnect the motor Disconnect the motor connectors.
4. 4. Disconnect the motor's power Disconnect the motor's power
cables. cables.
5. 5. Remove the two screws from the Remove the two screws from the
cable mounting bracket. cable mounting bracket.
6. 6. Lift the truck up and support it properly to prevent it from falling. See the correct Lift the truck up and support it properly to prevent it from falling. See the correct
lifting points in the section 5.1 lifting points in the section
7. 7. While supporting the motor from the While supporting the motor from the
traction wheel, remove the six traction wheel, remove the six
screws from the motor bed. screws from the motor bed.
8. 8. Drop the drive unit through the Drop the drive unit through the
motor bed. motor bed.
8.3.2 8.3.2 Disassembly of of the Disassembly
1. 1. Remove the screws attaching the Remove the screws attaching the
magnetic brake to the traction motor. magnetic brake to the traction motor.
2. 2. Remove the magnetic brake. Remove the magnetic brake.
3. 3. Remove the limiter from the traction Remove the limiter from the traction
motor. motor.
https://www.forkliftpdfmanuals.com/
Document ID: 615023 Document ID: 615023
connectors.
5.1 of this manual. of this manual.
the drive drive unit unit
107 (244) 107 (244)
Service Manual Service Manual