Mitsubishi PBV20N2 Service Manual page 151

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved. rights reserved. Revision: B Revision: B
PBV20N2 PBV20N2
PARAMETER PARAMETER
Check up done Check up done
CHECK UP DONE CHECK UP DONE
Check up type Check up type
CHECK UP TYPE CHECK UP TYPE
Electrobrake retain voltage Electrobrake retain voltage
EB VOLTAGE RED. EB VOLTAGE RED.
Fan start temperature Fan start temperature
FAN FAN TEMPERATURE TEMPERATURE
Main contactor retain voltage Main contactor retain voltage
MC VOLTAGE RED. MC VOLTAGE RED.
Maximum lifting time Maximum lifting time
MAX LIFT TIME MAX LIFT TIME
Throttle 0 zone Throttle 0 zone
THROTTLE 0 ZONE THROTTLE 0 ZONE
Throttle curve X-axis Throttle curve X-axis
THROTTLE X POINT THROTTLE X POINT
Throttle curve Y-axis Throttle curve Y-axis
THROTTLE Y POINT THROTTLE Y POINT
https://www.forkliftpdfmanuals.com/
Document ID: 615023 Document ID: 615023
Service Service Manual
DESCRIPTION DESCRIPTION
Maintenance request acknowledgement. Maintenance request acknowledgement.
0 = No maintenance warnings. 0 = No maintenance warnings.
• •
1 = Maintenance warning in 600 h. 1 = Maintenance warning in 600 h.
• •
2 = Maintenance warning in 600 h, speed 2 = Maintenance warning in 600 h, speed
• •
reduction in 640 h. reduction in 640 h.
3 = Maintenance warning in 600 h, speed 3 = Maintenance warning in 600 h, speed
• •
reduction in 640 h, truck stop in 680 h. reduction in 640 h, truck stop in 680 h.
This parameter controls the brake coil voltage one This parameter controls the brake coil voltage one
second after the activation of the brake voltage. The second after the activation of the
parameter should be set between 60% and 80%. parameter should be set between 60% and 80%.
Value range: Value range:
0%: Minimum 0%: Minimum
• •
100%: Maximum 100%: Maximum
• •
This parameter controls the temperature limit for This parameter controls the temperature limit for
fans. If any of the measured temperatures exceed fans. If any of the measured temperatures exceeds s
this value, the fans are started. this value, the fans are started.
This parameter controls the main contactor coil This parameter controls the main contactor coil
voltage one second after the activation of voltage one second after the activation of the main
contactor voltage. contactor voltage.
Value range: Value range:
0%: Minimum 0%: Minimum
• •
100%: Maximum 100%: Maximum
• •
Maximum lift time adjustment. Maximum lift time adjustment.
Level = 3: Minimum Level = 3: Minimum
• •
Level = 15: Maximum Level = 15: Maximum
• •
This parameter establishes the dead band in the This parameter establishes the dead band in
finger tip input curve (see Figure 86 finger tip input curve (see Figure 86 below).
This parameter changes the characteristics of the This parameter changes the characteristics of the
finger tip input curve (see Figure 86 finger tip input curve (see Figure 86 below).
This parameter changes the characteristics of the This parameter changes the characteristics of the
finger tip input curve (see Figure 86 finger tip input curve (see Figure 86 below).
150 (244) 150 (244)
Manual
brake voltage. The
the main
the
below).
below).
below).