Mitsubishi PBV20N2 Service Manual page 171

Table of Contents

Advertisement

© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All
   
   
CODE
CODE
243
243
245
245
246
246
247
247
248
248
249
249
250
250
rights reserved.
rights
reserved. 
 
Revision: B
Revision: B 
PBV20N2
PBV20N2
TRUCKTOOL
TRUCKTOOL
AND
AND
DISPLAY
DISPLAY
Error in pump command value range
Error in pump command value range
PUMP VACC RANGE
PUMP VACC RANGE
This alarm indicates that the lift lever voltage is out of range.
This alarm indicates that the lift lever voltage is out of range.
In such a case, check the following:
In such a case, check the following:
 
 
Teach the lift lever values again.
Teach the lift lever values again.
 
 
Check that the connectors and cables are in order.
Check that the connectors and cables are in order.
 
 
Replace the lift lever and t
Replace the lift lever and teach the new values.
Error in the pump command value
Error in the pump command value
PUMP VACC NOT OK
PUMP VACC NOT OK
This alarm occurs when the lift lever output voltage differs from the values acquired at
This alarm occurs when the lift lever output
calibration.
calibration.
In such a case, check the functionality of
In such a case, check the functionality of the lift lever. Perform the
function.
function.
Error in magnetic brake driver error
Error in magnetic brake driver error
 AUX DRIV. OPEN
 AUX DRIV. OPEN
This alarm indicates that the driver of the electromagnetic brake coil is not able
This alarm indicates that the driver of
load.
load.
The driver inside the COMBIACX controller is damaged, so the controller has
The driver inside the COMBIACX controller is damaged, so the controller has to be replaced.
 Acquisition of gain values
 Acquisition of gain values
DATA ACQUISITION
DATA ACQUISITION
This warning indicates acquisition of the current gains.
This warning indicates acquisition of the current gains.
The warning disappears when the acquisition is done. This alarm is a part
The warning disappears when the acquisition is
of the controller.
of the controller.
Curtis display not present
Curtis display not present
NO CAN MSG.
NO CAN MSG.
This alarm is displayed where there is no CAN message from the Curtis display.
This alarm is displayed where there is no
This alarm can be caused by a
This alarm can be caused by a CAN bus malfunction, which blinds the traction-display
communication. If not, it is an internal problem in the COMBIACX controller or in the
communication. If not, it is an
display.
display.
Call for programmed maintenance
Call for programmed maintenance
CHECK UP NEEDED
CHECK UP NEEDED
This is just a
This is just a warning calling for programmed maintenance.
warning calling for programmed maintenance.
Set the CHECK UP DONE parameter to the ON value after
Set the CHECK UP DONE parameter to the ON value after the maintenance is carried out.
Controller thermal sensor failure
Controller thermal sensor failure
THERMIC SENS. KO
THERMIC SENS. KO
This warning indicates that the output of the controller thermal sensor is out of range.
This warning indicates that the output of the controller thermal sensor is out of range.
This fault is not
This fault is not related to external components, so when it appears, replace the
related to external components, so when it appears, replace the COMBIACX
controller.
controller.
https://www.forkliftpdfmanuals.com/
 
Document ID: 615023
Document ID: 615023
DESCRIPTION
DESCRIPTION
(Alarm)
(Alarm)
each the new values.
(Alarm)
(Alarm)
voltage differs from the values acquired at
the lift lever. Perform the lift lever calibration wizard
(Alarm)
(Alarm)
the electromagnetic brake coil is not able to drive the
(Warning)
(Warning)
done. This alarm is a part of normal operation
(Alarm)
(Alarm)
CAN message from the Curtis display.
CAN bus malfunction, which blinds the traction-display
internal problem in the COMBIACX controller or in the Curtis
(Warning)
(Warning)
(Warning)
(Warning)
170 (244)
170 (244) 
Service Manual
Service
Manual
lift lever calibration wizard
Stored
Stored
to drive the
to be replaced.
of normal operation
Stored
Stored
Curtis
the maintenance is carried out.
Stored
Stored
COMBIACX
 

Advertisement

Table of Contents
loading

Table of Contents