Mitsubishi PBV20N2 Service Manual page 147

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved. rights reserved. Revision: B Revision: B
PBV20N2 PBV20N2
PARAMETER PARAMETER
ECO: Release braking ramp ECO: Release braking ramp
RELEASE BRAK. E RELEASE BRAK. E
ECO: Speed limit braking ramp ECO: Speed limit braking ramp
SPEED LIM BRK. E SPEED LIM BRK. E
ECO: Steering cutback braking ramp ECO: Steering cutback braking ramp
STEER BRAKING E STEER BRAKING E
Inversion braking ramp Inversion braking ramp
INVERS. BRAKING INVERS. BRAKING
Inversion smoothening Inversion smoothening
INV SMOOTH INV SMOOTH
Max speed forward Max speed forward
MAX SPEED FORW MAX SPEED FORW
Max speed FWD PIN 3 Max speed FWD PIN 3
MAX SP. FW PIN3 MAX SP. FW PIN3
Max speed FWD PIN1 Max speed FWD PIN1
MAX SP. FW PIN1 MAX SP. FW PIN1
https://www.forkliftpdfmanuals.com/
Document ID: 615023 Document ID: 615023
Service Service Manual
DESCRIPTION DESCRIPTION
This parameter controls the deceleration rate when This parameter controls the deceleration rate when
the accelerator is released in the economy drive the accelerator is released in the
mode. mode.
Value range: Value range:
0.1: Fastest 0.1: Fastest
• •
10: Slowest 10: Slowest
• •
This parameter controls the deceleration rate when This parameter controls the deceleration rate when
speed reduction is activated in the economy drive speed reduction is activated in the economy drive
mode. mode.
Value range: Value range:
0.1: Fastest 0.1: Fastest
• •
10: Slowest 10: Slowest
• •
This parameter controls the deceleration rate when This parameter controls the deceleration rate when
electrical steering cutback is activated in the electrical steering cutback is activated in the
economy drive mode. economy drive mode.
Value range: Value range:
0.1: Fastest 0.1: Fastest
• •
10: Slowest 10: Slowest
• •
This parameter controls the deceleration rate when This parameter controls the deceleration rate when
the direction switch is reversed while moving in the the direction switch is reversed while moving in the
standard drive mode. standard drive mode.
Value range: Value range:
0.1: Fastest 0.1: Fastest
• •
10: Slowest 10: Slowest
• •
This parameter controls the smoothness of direction This parameter controls the smoothness of
change during a drive. change during a drive.
Value range: Value range:
1: Minimum 1: Minimum
• •
• • 5: Maximum 5: Maximum
This parameter controls the maximum speed This parameter controls the maximum speed
forward in the standard drive mode. forward in the standard drive mode.
Value range: Value range:
10%: Slowest 10%: Slowest
• •
100%: Fastest 100%: Fastest
•
•
NOTE: For safety reasons, do not exceed the NOTE: For safety reasons, do not exceed the
parameter table value! parameter table value!
Maximum speed forward with PIN code 3. Maximum speed forward with PIN code 3.
Maximum speed forward with PIN code 1. Maximum speed forward with PIN code 1.
146 (244) 146 (244)
Manual
economy drive
direction