Mitsubishi PBV20N2 Service Manual page 122

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights rights reserved. reserved. Revision: B Revision: B
PBV20N2 PBV20N2
8.6.3 8.6.3 Tiller Tiller head head micro micro switch
Type
Type
Contact rating Contact rating
Electrical wiring Electrical wiring
Switching output Switching output
Spare part Spare part
Figure 70. Tiller head micro switch Figure 70. Tiller head micro switch
Micro switch functionality check: Micro switch functionality check:
Measure at the ohms area between the COM – NO terminals. Measure at the ohms area between the COM – NO terminals.
When the micro switch is in the neutral position, the ohms value is ~ When the micro switch is in the neutral position, the ohms value is ~ ∞ ∞ Ω Ω . .
The value between the COM – NC terminal is ~0 The value between the COM – NC terminal is ~0 Ω.
When the micro switch is actuated, the values are reversed. When the micro switch is
If the contacts are If the contacts are stuck together or broken, replace the micro switch. stuck together or broken, replace the micro switch.
https://www.forkliftpdfmanuals.com/
Document ID: 615023 Document ID: 615023
switch
Miniature basic switch Miniature basic switch
30 Vdc / 10 A 30 Vdc / 10 A
Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm
1 x NC + 1 x NO 1 x NC + 1 x NO
RL109007 RL109007
Ω.
actuated, the values are reversed.
121 (244) 121 (244)
Service Manual Service Manual