MAINTENANCE, STORAGE AND TRANSPORTATION
LUBRICATING OIL
Check and lubricate all components at the intervals listed in the
periodic maintenance chart. Items not listed in the chart should
be lubricated in the general lubrication interval. The rocker
arm is lubricated at the factory and does not require additional
lubrication. However, if these components are heavily used, the
user may perform additional lubrication as required.
Project
Engine oil
Front axle
gear oil
Rear axle
gear oil
Coolant
Brake
fluid
Suspension,
balance bar
grease
Recommended
model
10W/40-SL
SAE 80W/90 280mL
SAE 75W/90
or
SAE 80W/90
DOT4
Capacity
2.4L
220mL(No
differential)
260mL(With
differential)
——
106
Inspection
procedure
Maintain level
in safe range on
dipstick
Drive each
2000km(1200MI)
Kilometers.
Maintain the level
between the fill
lines.
Maintain the level
between the fill
lines.
Grease nozzle
( 3 Pump max)
per 500 mile.