Parking Brake - Segway Villain SX10 Owner's Manual

Brake pedal
1
Press the brake pedal
engine. To slow down or stop, press down the brake pedal with your right foot. The
brake pedal is spring-loaded and should return to position when not pressed.
Accelerator pedal
Push accelerator pedal
speed, press the accelerator pedal with your right foot. To slow down, release the
accelerator pedal. The accelerator pedal is spring-loaded and should return to
position when not pressed (idle speed).
When released, spring pressure returns the pedal to the rest position. Before
starting the engine, always check that the accelerator pedal is back on track.
If both accelerator and brake pedals are applied, engine power

Parking Brake

Whenever the driver leaves the vehicle, the parking brake handle must be pulled up
to keep the vehicle in a reliable parking state.
Turn on parking brake: first step on the brake pedal with your foot to make the whole
vehicle stand still, then press the button on the top of the parking brake handle with
your thumb, and at the same time pull the parking brake handle up, you will hear a
'click' sound when the vehicle is reliably parked, and then leave the brake pedal with
your right foot and the parking brake is activated.
Release the parking brake: Use your thumb to press the button on the top of the
parking brake handle, and then lower the handle to make the handle fully return to
the initial position, the parking brake is released, and the vehicle can be started at
this time.
When leaving the vehicle, always put the parking brake handle
up to ensure that the vehicle is in the parking condition in
order to prevent the vehicle from moving forward or backward
to slow down or stop. The brake is also used to start the
2
down to increase engine speed. To increase or maintain
! CAUTION
may be limited.
WARNING WARNING
!
and causing an accident.
2-13