Parking Brake - Segway FUGLEMAN UT10 2022 Owner's Manual

VEHICLE DEVICE VEHICLE DEVICE

Parking brake

Whenever a person leaves the vehicle, the parking brake must be
turned on to put it in the parking system working status
1
Turn on the parking brake:
When parking the car, first park the car on a suitable road, step on the
brake pedal to make the car stand still, and then hold the T-shaped
parking handle with your hand and pull it up until your foot releases
the brake The vehicle is still in a reliable stationary state when
pedaling, and the parking brake is turned on at this time.
Release the parking brake:
Press the lock button with your index finger, while holding the
T-shaped handle, rotate it 90 degrees clockwise, and push the
parking handle down to the bottom to release the parking.
When the driver leaves the vehicle, the parking brake of the vehicle
Parking handle
!
must be turned on
2
Parking button
CAUTION
54