Operating Proce&Re In The Normal Mode; Initial Screen - Mitsubishi Electric MELDAS 600 Series Instruction Manual

6.3 Operating procedure in the normal mode
6.3.1 Initial screen
The "Servo, Spindle F/w Down Load" menu appears when the tool is started in the normal mode.
p Servo down loader *
END-023WOOl-Al
[Driver information]
MCP #O : co> <l> <2>
DRV : 51 OOOOAO 510000A0 510000A0
PS :
[Module list]
1. Servo 01 51OOOOAl
2. Servo 00 51OOOOAO
[Please select down load module number to execute] [Quit: 9 ]
> 1 [Enter]
0 Connection axis No.
The data of the servo axis connected to the CNC is displayed.
-a* Servo download version
--* @I Connection axis No.
a*- @ Diier version
- 0 Power supply version
--* @ Module list
-a- @ Command input
@ Driver version
The system versions of the connected servo and spindle firmware are displayed.
0 Power supply version
The system version of the connected power supply is displayed.
@I Module list
1. Servo 01
51 OOOOAl
; b;-l.;;
Model No (Servo system: OO-3FBplndle system: 40-7F)
Amplifier type (Servo: Servo/ Spindle: Spindle)
@ Command input
Select the No. of the module to be downloaded, and press [Enter]. Press "q" [Enter] when the
operation is finished.
-IQ-